2 x ROWS FULL SPECTRUM XB LEDS#@1 x ROW RGB LEDS#@3W Power LEDS + RGB 3-in-1 LEDS#@PAR 146 @ 45cm @ 90°#@135W Power#@Dimmable, Sunrise/Sunset colour tunable#@
MML-FWP3B-150 is a 150cm TRIPLE ROW Full Spectrum combo panel system combining the power of 3W high performance LEDS for depth an intensity, and colour tunable 3-in-1 RGB leds for colour tuning. Designed to produce high light with the perfect spectrum for planted, community and fish display tanks.
Fully Plug & Play, all components are plug compatible allowing you to add, remove or swap any of the MakeMyLed range of LED fixtures and to swap in and out any of the MakeMyLed dimmer/controllers and power supply range at any time.
Panel systems like this are perfectly where aesthetics are important, they can be mounted on an open tank using the optional brackets, rest on the glasstop or can be suspended using the optional hang kit.
Model MML-FWP3B-150 has a full spectrum, hitting all the photosynthesis peaks for unrivaled growing power and lush growth of both green and red fresh water plants and a a very high CRI (colour Rendering Index) for natural colour reproduction and for highlighting blues and reds in fish.
Fully dimmable and colour tunable with a tried and proven blend of Cool White 6500K, Neutral White 4000K, 660nm Deep Red and 405nm UV Purple power leds and RGB 3-in-1 colour tunable leds, the MML-FWP3B-150 an outstanding performer and produces a beautiful shimmer in the water like natural sunlight on a clear pond when you ripple the water.
NOTE: See the Panels page for your tank length to see if this panel is suitable for your tank
|Model Name||1 x 150cm TRIPLE ROW FULL SPECTRUM COMBO LED PANEL SYSTEM|
|Fixture Style||Panel, 150cm long, 3cm high in the centre tapering down to 1.5cm, 16cm wide|
|Length||150cm. Tank brackets can slide out up to 15cm each end allowing the panels to sit on a tank 30cm longer than the panel length.|
|Cabling||Each panel has 2 x 2 metre standard 5.5/2.1 dc cables and 1 x 2 metre 4 pin RGB cable that exit from the side. Cables can connect to a dimmer/controller or directly to the power supply using the supplied adapter cable|
|Colour Channels||Each XB row is separately dimmable and the sunrise/sunset row has 3 individually controllable colour channels|
|Target Use||Planted tanks, Community and Fish Display tanks|
|Operating Voltage||24V DC|
|Power Consumption||135W at Max|
|LED Technology||Genuine Taiwan Epistar 3W power leds and .2W RGB LEDS|
|Life Expectancy||5 Years|
|Cooling Technology||Passively cooled, heat is dissipated naturally.|
|Water Resistant||Yes, can withstand light spashing but cannnot withstand persistant wetness|
|Blend||ROW 1: 15 x 6500K Cool White, 5 x 4000K Neutral White, 5 x 660nm Deep Red and 5 x 405mn UV Purple 3W power LEDS |
ROW 2: 180 x 3-in-1 RGB colour tunable LEDS
ROW 3: 15 x 6500K Cool White, 5 x 4000K Neutral White, 5 x 660nm Deep Red and 5 x 405mn UV Purple 3W power LEDS
Produces a perfect 6800K Full Spectrum blend that looks natural and grows plants like there's no tomorrow.
|CRI||> 91% for natural colour reproduction|
|Customizable||Yes. You can ask to have the standard pattern of the XB power leds varied to suit.|
|Optic Lenses||120° is standard and we use PMMA clip on lenses for 90°, 60° and 45° for targeted depths|
|Plug & Play||Yes. All MakeMyLed lighting systems, dimmer/controllers and power supplies are plug compatible.|
|Shimmer||Creates a beautiful shimmer in the water like natural sunlight on a clear pond when the surface is rippled|
|Spectrum||Full Spectrum. Hits all photosynthesis peaks|
|PAR Readings||See the PAR chart further down the listing|
|Country of Manufacture||Australia, built to perform, built to last|
We supply high quality and reliable 24V DC power supplies for all of our lighting systems with world wide certifications . For our local Australian and New Zealand customers, power supplies ship out with an approved IEC plug and cable, for international customers we supply the same AU cable and plug with an adapter for your country.
All components in the system are Plug & Play which means you can swap dimmers/controllers or power supplies at any time, remove tubes from your system or swap tubes around, you can even add tubes to your system within the limits of the power supply.
The MML-FWP3B-30 is fully colour tunable allowing you to select from an array of stunning colour blends or make your own for mood lighting and for highlighting specific colours in fish and plants. The pictures below show some of the many colour blends you can achieve with this light.
Featuring a complete full spectrum hitting all the right spots for the photosynthesis requirements for red and green plants and a wide band in the green part of the spectrum for aesthetics. Red plants will grow red and green plants will grow green.
The CRI (Colour Rendering Index) is very high > 91% which means this lighting system will reproduce natural vivid colours and showcase blues and reds in fish.
MakeMyLed tested many commercial LED products on the market, noted their failings and used this information to design a brand new system from the ground up, a fully plug & play system built to be reliable, built to last and have unrivalled performance. Manufactured in Australia by a small group of passionate perfectionists with over 30 years experience in aquarium lighting, built to order in our factory in Adelaide South Australia using quality components and shipped direct to your door.
The basic building block of MakeMyLed systems is the cleverly designed circuit board. Each MakeMyLed circuit board has 6 x 3W genuine Taiwanese Epistar power leds and high quality clip on acrylic optic lenses. 120°, 90°, 60° and 45° optic lenses available to target light for shallow tanks right up to the deepest tanks.
Many customers have sent in before and after tank shots showing the great results they are getting growing aquarium plants under MakeMyLed lighting technology. Here's a few actual customer tank shots.
Brightness is the measure of how bright lights are to the human eye, PPFD (Photosynthetic Photon Flux Density) often referred to as PAR is the measure of how effective light is to the inhabitants under water and varies according to how deep the water is, decreasing PAR as the water gets deeper. For more information on PAR, visit our LEDS 101 page.
This system comes with a choice of six optical lenses (aka beam angle), 120°, 90°, 60°, 45°, 30° and 15° , each one suits a specific depth range in aquariums. Optical lenses focus the light beam and produce a beam to match the optical angle i.e. 90° produces a 90° beam angle and 60° produces a 60° beam angle, Optic angle is also known as the beam angle. The smaller the angle the higher the intensity at the substrate with lower horizontal area coverage, the higher the angle the lower the intensity at the substrate with higher the horizontal area coverage. For more information about beam angles, visit our LEDS 101 page.
PAR readings at 100% intensity (umol/m2/s measured using a lab grade quantum meter)
|MML-FWP3B-150 PAR READINGS||Height from light to bottom of tank in cm|
All MakeMyled dimmers/controllers are plug compatible which means you can swap at any time by removing one and and adding another. Dimmers/Controllers are based on PWM (Pulse Width Modulation) technology which is the best and most energy efficient way of dimming LEDS without affecting the life expectancy.
See our ACCESSORIES page for more detailed information
2 tube system for heavily planted tanks
Posted by Douglas Green on 30th Sep 2018
I have had my 5ft panel light running on my planted Discus tank for the last 2 weeks and the difference between the old t5 unit is amazing. The plants have all taken off and are growing extremely well including the plants on the bottom meaning they light is still strong at the bottom of the tank (i ordered 90 degree lenses for the 2ft deep tank). The discus also seem happier and the new light certainly brings out their colours a lot more. The blues and reds are almost electric now and they get a lot more attention from guests now.
The sunset controller was an excellent add-on and I really recommend this for those who want the best out of the light. I have made up my own light pattern that replicates sunrise, sunset and then moonlight. Because you can vary the power as well as the colour you can have the light on for longer. with peak power only needed for a few hours.I can enjoy my fish from 7am to midnight now under all sorts of colours. Its great fun playing with the app on the phone too!
Value for money is really good. Comparable LED lights are easily several hundred dollars more and are simple on/off units. This unit has them beat in every way and is cheaper!
This is a very easy recommend! Do yourself, your plants and fish a favor and upgrade your light!
All prices are in AUD