Loading... Please wait...

100W Floodlight for Planted Tanks - Model MML-FWFL-100

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4

  Whats in the box

  • 1 x 100W Fresh Water Floodlight Model MML-FWFL-100 with 1.5 metre cable and Australian Plug
  • 1 x Mounting Bracket



MML-FWFL-100 is designed for fresh water planted and fish display tanks. A low cost commercial strength high intensity floodlight with a full spectrum blend of 6500K Cool White, 4000K Neutral White, 660nm Deep Red and 450nm Royal Blue leds designed for fresh water tanks and having a perfect spectrum for growing red plants red and green plants green with a high PAR for plants that need high intensity light.


Although the price of this light is low we haven't compromised the quality. An excellent quality non rusting anodised housing with a clever heatsink design to keep the leds cool, stainless steel screws and a tempered glass cover, designed perform and designed to last.

The fixture has an IP65 Rating meaning it is protected against water spray from all directions.

Designed as a no-frills aquarium light for those on a budget, does a perfect job on Fresh Water tanks but is not dimmable or colour tunable like our XB2 and RGB range. No power pack required for this light, plugs directly into the mains power and has CE, ROHS, SAA and RCM certification.


Model Number MML-FWFL-100
Model Name 1 x 100W Floodlight for Fresh Water
Fixture Style Floodlight
Dimensions 30*22.5*43 cm
Coverage Extra High Light for a 60cm Cube
Target Use Fresh Water Planted, Community and Fish displays
Weight 1.8 KG
Cabling 1.5 metre mains cable with Australian Plug
Operating Voltage 220-240V AC
Power Consumption 100W
Dimmable No
LED Technology Genuine Taiwan Epistar 2835 .5W power leds
Life Expectancy 5 Years
Cooling Technology Passively cooled, heat is dissipated naturally.
Water Resistant IP65 Rated, can withstand splashing from any direction
Colour Tunable No
Optic Lenses 120°
Shimmer Creates a beautiful shimmer in the water like natural sunlight on a clear pond when the surface is rippled
Spectrum flfwa.jpg
240 x 2835 Leds 6500K: 4000K: 660nm: 450nm Ratio 15:5:5:5
120 x 6500K Cool White 2835 Leds
40 x 4000K Neutral White 2835 Leds
40 x 660nm Deep Red 2835 Leds
40 x 450nm Royal Blue 2835 Leds
PAR Readings See the PAR chart further down the listing
Warranty 1 year
Country of Manufacture Australia, built to perform, built to last

  Heavy Duty Industrial Strength


  High PAR rating

Brightness is the measure of how bright lights are to the human eye, PPFD (Photosynthetic Photon Flux Density) often referred to as PAR is the measure of how effective light is to the inhabitants under water and varies according to how deep the water is, decreasing PAR as the water gets deeper. For more information on PAR, visit our LEDS 101 page.

PAR readings at 100% intensity (umol/m2/s measured using a lab grade quantum meter)

MML-FWFL-100 PAR READINGS Height from light to bottom of tank in cm
 30  45  60
Beam Angle 
 120°  485  251  142

  • Readings were taken for a single Floodlight, PAR will be approx 80% higher if using more than one floodlight in close proximity
  • PPFD readings of 50 umol/m2/s or over at the substrate is considered high light and will support sustainable growth in difficult to grow and light demanding plants.

 Warranty Information

2 tube system for heavily planted tanks

 Other Details

tooltip:Beam Angle::
If you are not sure what to choose here, use the planner tool to get a recommendation for your tank
tooltip:Note to MakeMyLed::
If you require a custom led layout, add a note here describing your requirement or add a note during checkout


Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Copyright 2019 MakeMyLed

All Rights Reserved.


Click the button below to add the 100W Floodlight for Planted Tanks - Model MML-FWFL-100 to your wish list.