Loading... Please wait...


Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
  • Image 15
  • Image 16
  • Image 17
  • Image 18

  Whats in the box

  • 2 x Lightweight 60cm goosenecks with On/Off switch and aquarium clamp
  • 24V DC Power supply with AC Power cable and plug
  • Inline dimmer
  • All necessary cables and connections
  • Your choice of Optic lenses to suit the depth or your aquarium


Optional Items

  • Advanced Dimming accessory
  • This system comes with the set of optic lenses you chose, additional optic lens sets for 60°, 36°, 24° and 15° are available to add to your order from our LENS SETS page.


MML-FLORASUN-402 is a Dual Pendant 40W per lamp high performance dual channel pendant lamp system with a lightweight 60cm gooseneck fitting and acrylic tank clamp.

The MML-FLORASUN-402 has a full spectrum designed specifically for Fresh Water planted, community and fish display tanks and hits all the photosynthesis peaks for unrivaled growing power and lush growth of both green and red fresh water plants with a very high CRI 91% for natural colour reproduction and for highlighting blues and reds in fish.

Dual channel control can be performed using the control knob on the lamp or via the optional 0-5V pwm jack and an external pwm source like Coralux, Bluefish and Arduino.

Fully dimmable using any of the shown controllers and with a tried and proven blend of Cool White 6000K, 660nm Deep Red and 450nm Royal Bluemaking the MML-FLORASUN-402 an outstanding performer and producing an awesome shimmer in the water when the surface is rippled.



Fixture Style Pendant Lamp with  clamp and gooseneck
Cabling Each gooseneck has a 75cm cable with a 5.5/2.1 DC power plug which can connect to a dimmer/controller or directly to a 24V DC power supply. Power extension cables from our Accessories page can be used to make the cable longer if required.
Gooseneck and clamp Fitting Clamp is 5cm x 5cm x 4cm and can fit over glass up to 30mm thick. Gooseneck has a fixed part 25cm and a flexible part 40cm.
Colour Channels Two channels per lamp. Channel 1: 6000K white, Channel 2: Fiji purple, both channels on together produces the perfect natural look and full spectrum for fresh water tanks.
Target Use Planted tanks, Community and Fish Display tanks
Supply Voltage 85V-240VAC
Operating Voltage 24V DC
Driver Meanwell
Power Consumption 80W at Max (40W per Lamp)
Dimmable Yes
LED Technology Genuine Osram 3535 3W power leds
LED Arangement 4 x clusters of 6 leds per lamp
Life Expectancy 5 Years
Cooling Technology Super silent active cooling fan
Water Resistant No
Blend per lamp Channel 1: 12 x 6000K Cool White
Channel 2: 4 x 660nm Deep Red, 4 x 450nm Royal Blue, 4 x 6000K Cool white (Fiji Purple)
producing a perfect Full Spectrum blend that looks natural and grows plants like there's no tomorrow.
Colour Tunable Yes via the on-board control knob and by the optional external 0-5V PWM input. Turn the control knob left to decrease the intensity of channel 1, turn right to decrease the intensity of channel 2, in the middle for both channels the same intensity
CRI > 91% for natural colour reproduction
Coverage Up to 60cm surface diameter per lamp with 60° optic lenses, smaller surface diameter with higher intensity when using 36°, 24° and 15° optic lenses. Use the Planner tool to calculate the most suitable system for your tank.
Plug & Play Yes. All MakeMyLed lighting systems, dimmer/controllers and power supplies are plug compatible.
Shimmer Creates a beautiful shimmer in the water like natural sunlight on a clear pond when the surface is rippled
Spectrum Full Spectrum. Hits all photosynthesis peaks for unrivaled fresh water plant growth and natural look on fresh water aquariums
PAR Readings See the PAR chart further down the listing
Warranty 1 year
Country of Manufacture Australia, built to perform, built to last

  Quality Power Supplies

We supply high quality and reliable 24V DC power supplies for all of our lighting systems with world wide certifications and world wide 85V-240VAC input voltage. For our local Australian and New Zealand customers, power supplies ship out with an approved IEC plug and cable, for international customers we supply the same AU cable and plug with an adapter for your country.

  Plug & Play System

All components in the system are Plug & Play which means you can swap dimmers/controllers or power supplies at any time, remove tubes from your system or swap tubes around, you can even add tubes to your system within the limits of the power supply.


  Full Spectrum

Featuring a complete full spectrum hitting all the right spots for the photosynthesis requirements for red and green plants and a wide band in the green part of the spectrum for aesthetics. Red plants will grow red and green plants will grow green.

The CRI (Colour Rendering Index) is very high > 91% which means this lighting system will reproduce natural vivid colours and showcase blues and reds in fish.



  High PAR rating

Brightness is the measure of how bright lights are to the human eye, PPFD (Photosynthetic Photon Flux Density) often referred to as PAR is the measure of how effective light is to the inhabitants under water and varies according to how deep the water is, decreasing PAR as the water gets deeper. For more information on PAR, visit our LEDS 101 page.

This system comes with a choice of six optical lenses (aka beam angle), standard for most tanks is 60° and will cast high light over a 60cm diameter circle 60cm deep, 36°, 24° and 15°  are also available to cast a narrower beam and penetrate deeper. Optical lenses focus the light beam and produce a beam to match the optical angle i.e. 90° produces a 90° beam angle and 60° produces a 60° beam angle, Optic angle is also known as the beam angle. The smaller the angle the higher the intensity at the substrate with lower horizontal area coverage, the higher the angle the lower the intensity at the substrate with higher the horizontal area coverage. For more information about beam angles, visit our LEDS 101  page.

PAR readings at 100% intensity (umol/m2/s measured using a lab grade quantum meter)

MML-FLORASUN-402 PAR READINGS Height from light to bottom of tank in cm
 30  45  60
Beam Angle 
 60°  420  184  108
 36°  1612  664  356
 24°  2024  1002  576
15° 2461 1361 837

  • This is a high light system and is fully dimmable so you can run it at lower than full capacity if you don't need that much light.
  • Pendants in close proximity to each other will have additive PAR where the beams cross
  • PPFD readings of 50 umol/m2/s or over at the substrate is considered high light and will support sustainable growth in difficult to grow and light demanding plants.

  Plug & Play Dimmers/Controllers

All MakeMyled dimmers/controllers are plug compatible which means you can swap at any time by removing one and and adding another. Dimmers/Controllers are based on PWM (Pulse Width Modulation) technology which is the best and most energy efficient way of dimming LEDS without affecting the life expectancy.

See our ACCESSORIES page for more detailed information

Inline Dimmer
Simple but effective system dimmer

  • On/Off
  • 7 step dimming
  • li>Memory
  • Various novelty modes

Programmable Wifi Controller
Control by Wifi from your iOS or Android phone, free app available.

  • Programmable Wifi controller with 6 On/Off timers
  • Control your system from home or away from home via your Wifi modem.
  • Store and recall favorite settings e.g. morning, noon, night.
  • 6 software timers for On/Off and to set intensity
  • Master On/Off

MakeMyLed Wifi Controller instructions.pdf

Sunrise/Sunset Auto Controller
A versatile Wifi enabled set and forget programmable timer with awesome Sunrise/Sunset ramping

  • Programmable, can store 50 programs, each program can have up to 48 timers
  • Pre-programmed for ramping Sunrise/Noon/Sunset/moonlight dimming
  • Create your own dimming patterns using the supplied
  • Programmable via USB cable on Windows, or Wifi on Android and iOS
  • Gentle and natural fade in/fade out ramping of timers

MakeMyLed Auto Controller instructions.pdf

 Warranty Information

2 tube system for heavily planted tanks

 Other Details

tooltip:Beam Angle::
60° is suitable for most tanks and will cast good light for a 60cm cube. Smaller beam angles will cast a narrower and deeper beam
For rim mounting, brackets can slide out up to 15cm each end for longer tanks. See picture.
The inline dimmer provides basic controls, for more advanced control consider upgrading to the Wifi or Auto controller.
tooltip:Hang Kit::
Includes brass eyelets and hanging wires as shown. See picture.
rule:Length ::
Power Supply:30CM,BYO,60W,40W MW,90W MW,360W OF,320W MWOF:60CM,BYO,180W DT#@
tooltip:Power Supply::
Choose Yes if you want us to provide a 24V power supply as part of the package, Choose No if you have your own, want to buy your own or want to buy a 24V power supply with a specific capacity from our Accessories category.
tooltip:Power Supply Upgrade::
Choose this option if you want the ability to add more pendants to your system later. We will ship a larger capacity power supply that can handle up to 4 pendants.
tooltip:PWM Input Jack::
This system comes with a colour tuning knob on the lamp and suits most applications, if you have a need to control the channels using an external PWM signal then choose Yes and we will add a PWM jack option to your lamp(s).


Product Reviews

  1. Amazing Plant Growth

    Posted by Andrew on 16th May 2018

    After replacing the poorly performing lighting that came with my fish tank and replacing it with the LED pendant lighting, I have seen a dramatic increase in plant growth in my tank. In only two weeks I've had more growth than I'd managed in over 12 months with my previous lighting. I couldn't be happier


Copyright 2019 MakeMyLed

All Rights Reserved.


Click the button below to add the 2 x FLORA SUN 40W DUAL CHANNEL FULL SPECTRUM PENDANT - MML-FLORASUN-402 to your wish list.