Loading... Please wait...

3 x 90CM COMBO TUBES - Model MML-FWT3B-90

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
  • Image 15
  • Image 16

  Whats in the box

  • 1 x MML-FWT3B-90 ready to plug in and go.
  • 2 x 6800K Full Spectrum XB2 TUBES
  • 3 x sets of Universal hood/glasstop mounting clips
  • Your choice of Dimmer/Controller
  • 24V DC Power supply with AC Power cable and plug
  • All necessary cables and connections
  • Your choice of Optic lenses to suit the depth or your aquarium


Optional Items

  • This system comes with 2 universal mounting clips per tube for glasstop and under hood mounting. If you want tank brackets you can order these from our TANK BRACKETS page, if you want a hang kit you can order from HANG KITS


MML-FWT3B-90 is a 90cm 3 TUBE Full Spectrum combo tube system combining the power of 3W high performance LEDS for depth an intensity and colour tunable 3-in-1 RGB leds for colour tuning. Designed to produce high light with the perfect spectrum for planted, community and fish display tanks.

Fully Plug & Play, all components are plug compatible allowing you to add, remove or swap any of the MakeMyLed range of LED fixtures and to swap in and out any of the MakeMyLed dimmer/controllers and power supply range at any time.

Tube systems like this are perfectly suited for under hood installation including retrofitting into molded plastic hoods, being only 3cm in diameter and weighing only 100g per 30cm, they are very light weight small footprint tubes suitable for suspension mounting using the optional suspension kit, for resting on the aquarium glass-top using the supplied universal clips or for rim mounting using the optional acrylic brackets. Tubes can be custom spaced to suit your tank top and can be rotated in the holding clips for directional lighting or to eliminate glare.

Model MML-FWT3B-90 has a full spectrum, hitting all the photosynthesis peaks for unrivaled growing power and lush growth of both green and red fresh water plants and a a very high CRI (colour Rendering Index) for natural colour reproduction and for highlighting blues and reds in fish.

Fully dimmable and colour tunable with a tried and proven blend of Cool White 6500K, Neutral White 4000K, 660nm Deep Red and 405nm UV Purple power leds and RGB 3-in-1 colour tunable leds, the MML-FWT3B-90 an outstanding performer and produces a beautiful shimmer in the water like natural sunlight on a clear pond when you ripple the water.



Model Number MML-FWT3B-90
Model Name 3 x 90cm COMBO LED TUBE SYSTEM
Fixture Style Tube, 3cm diameter tubes rotatable for directional lighting.
Length 90cm. Tank brackets can slide out up to 5cm each end allowing the tubes to sit on a tank 10cm longer than the tube lengthl.
Cabling Each tube has a generous 2 metre cable that exits from the rear of the tube to facilitate directing cabling to the rear of the tank in a tidy way.
Colour Channels Each XB tube is separately dimmable and the RGB TUBE has 3 individually controllable colour channels
Target Use Heavily Planted, Community and Fish Display tanks
Supply Voltage 85V-240VAC
Operating Voltage 24V DC
Driver Meanwell
Power Consumption 81W at Max
Dimmable Yes
LED Technology Genuine Taiwan Epistar 3W power leds and .2W RGB LEDS
Life Expectancy 5 Years
Cooling Technology Passively cooled, heat is dissipated naturally.
Water Resistant Yes, can withstand light spashing but cannnot withstand persistant wetness
Blend TUBE 1: 9 x 6500K Cool White, 3 x 4000K Neutral White, 3 x 660nm Deep Red and 3 x 405mn UV Purple 3W power LEDS
TUBE 2: 108 x 3-in-1 RGB colour tunable leds
TUBE 1: 9 x 6500K Cool White, 3 x 4000K Neutral White, 3 x 660nm Deep Red and 3 x 405mn UV Purple 3W power LEDS
Produces a perfect Full Spectrum blend that looks natural and grows plants like there's no tomorrow.
Colour Tunable Yes
CRI > 91% for natural colour reproduction
Customizable Yes. You can ask to have the standard pattern varied to suit.
Optic Lenses 120°, 90°, 60°, 45°, 30° and 15° for targeted depths
Plug & Play Yes. All MakeMyLed lighting systems, dimmer/controllers and power supplies are plug compatible.
Shimmer Creates a beautiful shimmer in the water like natural sunlight on a clear pond when the surface is rippled
Spectrum Full Spectrum. Hits all photosynthesis peaks
PAR Readings See the PAR chart further down the listing
Warranty 1 year
Country of Manufacture Australia, built to perform, built to last

  Quality Power Supplies

We supply high quality and reliable 24V DC power supplies for all of our lighting systems with world wide certifications . For our local Australian and New Zealand customers, power supplies ship out with an approved IEC plug and cable, for international customers we supply the same AU cable and plug with an adapter for your country.

  Plug & Play System

All components in the system are Plug & Play which means you can swap dimmers/controllers or power supplies at any time, remove tubes from your system or swap tubes around, you can even add tubes to your system within the limits of the power supply.


  Custom Lengths

Custom lengths are available. MakeMyLed circuit boards are 29CM long and we can do custom length tubes by reducing tube length by 1cm per 30cm without affecting the number of LEDS. e.g. a 150cm tube can be cut down to 145cm, a 60cm tube can be cut down to 58cm. To order a custom cut like this add a note in the order confirmation box during checkout or on the paypal confirmation screen if using the checkout with paypal option.

We can also cut shorter than 1CM per 30CM e.g. cut 90cm tubes down to 75cm for example. To do this we have to remove one bank of leds and space the remaining banks evenly. e.g. a 90cm tube cut down to 75cm would have 2 banks of leds with a space both ends and in the middle instead of 3 banks of leds. To order a custom cut like this select the length lower than the length you need and add a note in the order confirmation box during checkout or on the paypal confirmation screen if using the checkout with paypal option.

  Flexible mounting


  Colour Tunable

Colour tunable allowing you to select from an array of stunning colour blends or make your own for mood lighting and for highlighting specific colours in fish and plants. The pictures below show some of the many colour blends you can achieve with this light.


  Full Spectrum

Featuring a complete full spectrum hitting all the right spots for the photosynthesis requirements for red and green plants and a wide band in the green part of the spectrum for aesthetics. Red plants will grow red and green plants will grow green.

The CRI (Colour Rendering Index) is very high > 91% which means this lighting system will reproduce natural vivid colours and showcase blues and reds in fish.


  Leading edge technology

MakeMyLed tested many commercial LED products on the market, noted their failings and used this information to design a brand new system from the ground up, a fully plug & play system built to be reliable, built to last and have unrivalled performance. Manufactured in Australia by a small group of passionate perfectionists with over 30 years experience in aquarium lighting, built to order in our factory in Adelaide South Australia using quality components and shipped direct to your door.


The basic building block of MakeMyLed systems is the cleverly designed circuit board. Each MakeMyLed circuit board has 6 x 3W genuine Taiwanese Epistar power leds and high quality clip on acrylic optic lenses. 120°, 90°, 60° and 45° optic lenses available to target light for shallow tanks right up to the deepest tanks.


The low resistance circuit boards have an onboard microprocessor controlled constant current LED driver circuit to deliver optimum current for one bank of 6 leds and to protect those leds from external power spikes and surges, this results in a very stable, reliable and long life system. The design is modular in that longer MakeMyLed systems can be made by joining boards together and applying power at one end only.



  High PAR rating

Brightness is the measure of how bright lights are to the human eye, PPFD (Photosynthetic Photon Flux Density) often referred to as PAR is the measure of how effective light is to the inhabitants under water and varies according to how deep the water is, decreasing PAR as the water gets deeper. For more information on PAR, visit our LEDS 101 page.

This system comes with a choice of six optical lenses (aka beam angle), 120°, 90°, 60°, 45°, 30° and 15° , each one suits a specific depth range in aquariums. Optical lenses focus the light beam and produce a beam to match the optical angle i.e. 90° produces a 90° beam angle and 60° produces a 60° beam angle, Optic angle is also known as the beam angle. The smaller the angle the higher the intensity at the substrate with lower horizontal area coverage, the higher the angle the lower the intensity at the substrate with higher the horizontal area coverage. For more information about beam angles, visit our LEDS 101  page.

PAR readings at 100% intensity (umol/m2/s measured using a lab grade quantum meter)

MML-FWT3B-90 PAR READINGS Height from light to bottom of tank in cm
 15  30  45  60  75
Beam Angle 
 120°  250  184  136  99  73
 90°  270  198  146  107  77
 60°  291  215  159  116  85
45° 316 247 182 133 97
30° 379 296 218  159 116
15° 569 447 328  239 175

  • Measurements were taken with tubes 13cm apart.
  • PAR will be approx 20% higher if tubes are 9cm apart and 40% higher if tubes are 5cm apart.
  • This is a high light system and is fully dimmable so you can run it at lower than full capacity if you don't need that much light.
  • PPFD readings of 50 umol/m2/s or over at the substrate is considered high light and will support sustainable growth in difficult to grow and light demanding plants.

  Plug & Play Dimmers/Controllers

All MakeMyled dimmers/controllers are plug compatible which means you can swap at any time by removing one and and adding another. Dimmers/Controllers are based on PWM (Pulse Width Modulation) technology which is the best and most energy efficient way of dimming LEDS without affecting the life expectancy.

See our ACCESSORIES page for more detailed information

Hand held Remote
4 Channel hand held remote controller

  • Colour wheel for easy colour selection
  • Master On/Off button
  • Master Intensity slider
  • Individual controls for each colour channel

Programmable Wifi Controller
Control by Wifi from your iOS or Android phone, free app available.

  • Programmable Wifi controller with 6 On/Off timers
  • Control your system from home or away from home via your Wifi modem.
  • Store and recall favorite settings e.g. morning, noon, night.
  • Master On/Off

MakeMyLed Wifi Controller instructions.pdf

Auto Sunrise/Sunset controller
A versatile Wifi enabled set and forget programmable timer to completely automate your lighting system. 

  • Programmable, can store 50 programs, each program can have up to 50 timers
  • Pre-programmed for ramping Sunrise/Noon/Sunset/moonlight dimming
  • Create your own dimming patterns using the supplied Windows and Android software
  • Programmable via USB cable or Wifi
  • Gentle and natural fade in fade out ramping of timers

MakeMyLed Auto Controller instructions.pdf

 Warranty Information

2 tube system for heavily planted tanks

 Other Details

tooltip:Beam Angle::
If you are not sure what to choose here, use the planner tool to get a recommendation for your tank
tooltip:Acrylic Brackets::
This lighting systems comes supplied with Universal clips for mounting onto the underside of a hood or resting on a glass top. Acrylic Brackets are only required for rim mounting on an open tank. See picture.
Your system will work without a dimmer/controller but you won't be able to dim your system or colour tune without one. See Pictures.
tooltip:Hang Kit::
Includes 2 sets of suspension wires and 2 brackets with brass eyelets and tube mounting clips. See picture.
rule:Length ::
Power Supply:30CM,BYO,60W,40W MW,90W MW,360W OF,320W MWOF:60CM,BYO,180W DT#@
tooltip:Power Supply::
Choose Yes if you want us to provide a 24V power supply as part of the package, Choose No if you have your own, want to buy your own or want to buy a 24V power supply with a specific capacity from our Accessories category.


Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Copyright 2019 MakeMyLed

All Rights Reserved.


Click the button below to add the 3 x 90CM COMBO TUBES - Model MML-FWT3B-90 to your wish list.